Bios

Hey! I'm Deb 1 from NJ. I've been doing crafts for as long as I can remember. About 15 years ago I started scrapbooking, which lead to cardmaking about 2 years ago. I also have fun with vinyl and HTV. I'm a retired nurse, mother of 2 grown boys and have been married to my husband for 33 years

Hi This is Deb 2 I am from Essex Ontario Canada and have been in to card making for 6 yeas that lead to paper piecing and 3D papercrafting Also work with vinyl. I am a retired Animal Health Technician, single and the proud pet parent of 3 dogs and 1 cat

Tuesday, 23 May 2017

HTV Shirt Day!

My niece was visiting a couple of weeks ago and she wanted to make some t-shirts for her and her husband.

Off to my craft room we go!  She wanted some summer/beach/boating themed shirts for them.  After looking in the Silhouette Design store and getting a few images, we also created some of our own images.

They boat a lot, so, of course, Boat Hair Don't Care was on the list.  Also on the list was a Beach Life Shirt, a couple of fishing shirts, and a shirt with their boat name on it.  We cut all the images out on my Silhouette Cameo, and heat pressed them on the shirts with my heat press.

My niece had soo much fun, she ordered a Silhouette Cameo and Heat Press for herself.  She is now enjoying the craft of HTV!!


Thanks for looking!  Have a crafty day!  ~  Deb

Summer Journal Page featuring Julie Nutting Doll Stamp


I finally purchased my first Dylusions Journal!  I was soo excited to get it I just had to do a page right away.

My favorite season is Summer and the Beach, so going with that theme, I started my page.  For the background, I used Tim Holtz's Distress Oxide Ink in Faded Jeans and Broken China.  I made a wave stencil and cut it out with my Silhouette Cameo.  I got out my Faber Castell Whipped Spackle and some blue acrylic paint.  I blended the two together to use with the stencil.  I placed the stencil over the page and applied the colored Whipped Spackle.

I knew I needed sand, so I went across the street to the beach and picked up a small jar of sand.  I mixed the sand with some Mod Podge just until all the sand was covered.  Using a spackle knife, I applied the sand to my journal page and pressed hard to make sure it stuck.  Then it was time to wait for the blue background and sand to dry.

While that was drying, I stamped my Julie Nutting doll on a piece of Julie's A4 Buff paper.  That is a great paper pad because it gives you several different skin tones.  For the clothes, I paper pieced them and glued them on.  The hair and hair band were colored using my Spectrum Noir markers.

Once everything was dry, I glued my girl so that her knees were in the sand.  I then added a couple of brass shell embellishments on the sand, and a sailboat in the distance.  The sentiment says it all!  "Simple Times".....they are the times I cherish while at the beach where you can forget everything and totally relax while listening to the sea.

Thanks for stopping by!  Have a crafty day ~  Deb

Crafty Gals Corner Challenge #124 Use 2 or more Designer Papers



Hello fellow crafters  Up for another challenge???  This week you have to use 2 or more designer papers.  This week i used the digi Spring Bumble Bee by Star Stampz 



This weeks sponsor are 


Prize: 3 Digital images 

and 


Morgan's ArtWorld


Prize: 3 Digital Images 


Have a great week And craft On 

Deb 2

Easter Basket Lining and Onesie





I know this post is a little late, but better late than never, as my Mom always told me!

A friend of mine needed an Easter basket for her daughter.  She couldn't find a lined basket that she liked.  So, she bought a nice white basket and some really pretty fabric to make a liner.  Along with the basket and fabric, she also dropped off a onesie to be deisnged for Easter.

I had never made a basket lining before, so the first place I went was Google.  I don't know how I ever lived without Google!  You can find everything there!  I found directions on how to make a basket lining for a round basket, took the measurements I needed and cut the fabric.

The first part was to sew the bottom circle to the side fabric.  The side fabric had to be gathered some to fit the circle.  The next to sew together was the flap.  I measured twice and cut once for the front flap and back flap pieces.



The next to sew together was the flap.  I measured twice and cut once for the front flap and back flap pieces.  I pinned the flap pieces onto the lining just to be sure they were the right length.

Next on the agenda was personalization.  I put one of the flap pieces in my embroidery machine and added her name.


Then sewed the flap pieces to the basket lining and added some ribbon at the end of each flap so that it could be tied on the basket.

On to the onesie.  My friend had picked out a super cute Easter image for the onesie.  I purchased this image from Apex Embroidery and cut it out of Heat Transfer Vinyl.  Using my heat press, I pressed it onto the onesie.

My friend was extremely happy with both the basket and the onesie!!  That sure makes a girl feel good!

Thanks for stopping by!  Have a crafty day ~ Deb

Monday, 22 May 2017

Snips & Snails Banner and Diaper Cake



I was tickled pink when I was asked to make a banner for my soon-to-be grandson. My son had asked that i use the words “Little One” so that he could hang it in the baby’s room. I wanted to use fabrics for the pennants so that it would hang well and last for a while. I had purchased the Snips and Snails mixed media pack and that’s where it all started. With the colors I used, it looks perfect over his changing table! I also made a coordinating diaper cake utilizing paper from Snips and Snails,


STEP 1
The first thing I did was choose the fabrics I wanted to work with, and cut them into the shapes I needed.


Step 2
I then splattered baby blue High Impact Paint and metallic white High Impact paint on all my pennant pieces. When they were dry, I added a light spray of navy blue and old lace Glimmer Mist.


STEP 3
The lettering was cut on my Silhouette Cameo using paper from the Snips and Snails collection. I distressed the edges of the circle with my distresser. I layered the cut out letter on a solid circle so that the baby blue stood out. I then added some burlap ribbon at the top.


STEP 4
For the end pieces, I cut two ovals out of burlap. I used my Big Shot and Tim Holtz’s Tattered Flower template to cut flowers or each end.



STEP 5
For the blue burlap pennant between the words, I used a burlap circle layered on a piece of paper from the collection, and a tag from the new Baby Tag set.

STEP 6
Between the first pennant, and between the words, I tore some denim and canvas to make a fringy look. I then added some navy glimmer mist, baby blue and white metallic high impact paint.

STEP 7
For the penants at each end, I used my Big Shot and cut Tim Holtz Tattered Flowers and adhered them on the burlap ovals.

STEP 8
I then cut some burlap ribbon and adhered to to the top of each pennant piece.

STEP 9
For the finishing touch, I used the Crop-a-Dile and attached bronze eyelets so I could thread the twine through all pieces.



It looks great on the wall above the changing table.  All the colors used are just perfect!



MATERIALS USED:Canvas Corp Canvas Fabric
Canvas Corp Burlap Fabric- Blue
Canvas Corp Denim Fabric
Canvas Corp Snips and Snails Mix and Match Pad
Canvas Corp New Baby Tag Pack
Tattered Angels Glimmer Mist- Navy Blue
Tattered Angels High Impact- Baby Blue
Tattered Angels High Impact- Metallic White
Tim Holtz Tattered Flower Die
Scissors
Big Shot
Silhouette Cameo
Prima Edge Distresser
Crop-a-Dile
Bronze Eyelets

Thanks for stopping by!  Happy Crafting - Deb

3D Deer Head Diaper Cake


I was asked by a friend to make a hunting themed diaper cake for her daughter's baby shower.  The only ideas she could give me was camouflage and orange.  So, I put my thinking cap on and headed over to the Silhouette Design Store.  In the Store, I found a 3D deer head which I thought would be perfect for the cake topper!  I proceeded to cut all the pieces out for the deer head.


I cut out two sets of antlers so that I could add some thin wire between them to be able to bend, if needed.  I then glued the antlers, and green "plaque", and slid the head pieces on the head.


Then it was time to work on the cake.  I rolled and rubber banded 76 size 2 diapers.  I use size 2 in case the mom-to-be wants to use the cake as a decoration for a while.

I could not find any camoflage ribbon, so I purchased 1/2 yard camo fabric and 1/4 yard orange fabric.

 I cut the camo fabric at 3" and the orange fabric at 1.5" to use as my ribbon.  I also made some bows out of the fabric to place on the backwhere the ribbon meets.


It was time to get images to place around the cake.  So, back to the Silhouette Store I went.  I cut several images that have to do with hunting.  I wanted a special image for the center front.  I found an antler monogram image, cut that out, and added the baby's initials.  Before placing the images onto the cake, I inked the edges with Vintage Photo Distress Ink.


For the front, I knew I wanted to add his initials.  I found an antler monogram file in the Silhouette Store.  I added his initials and placed them inside.  I then placed the antler monogram center front of cake.  I also added a couple small images on the bottom and top layer of the cake on the front.




The last thing to do at this point was add the 3D deer head to the top.  I cut two pieces of fairly heavy chipboard the same shape as the plaque.  I then glued the deer head plaque to one piece of chipboard. I added two pieces of metal rod to the remaining piece of chipboard about 1" from either side so that the top wouldn't spin.  Now its time to glue the two pieces of chipboard together.  I spread wet glue all over it then added some hot glue to the top edge.  Put both pieces together fast so the hot glue doesn't dry.  Press hard, then add hot glue down the sides and on the bottom as needed so the pieces stay glued together.  I didn't like the raw edges of the "plaque" section, so I cut a thin strip of orange fabric and glued it around the edges with fabric glue.  The final addition, was a bow on the back of the plaque.

Left Side

Right Side

And here is a picture of it surrounded by all the presents at the baby shower. It was a huge hit at the shower!


I hope you enjoyed my version of a deer hunting diaper cake!!  Have a crafty day ~ Deb

Monday, 15 May 2017

Crafty Gals Corner Challenge #123 FLOWERS



Welcome to a new challenge over at  Crafty Gals Corner  The theme this week is Flowers which if you following me you know i love and most cards i make contain flowers
This week I used  Beautiful Day by Miss Daisy Stamps    Being a country girl myself  i can just visualize this little girl looking out into the pasture watching the horses Hope you like her




This weeks sponsors for the challenge are:


 Prize: 3 Winners!!
1. $10 Gift certificate 
2.  1 digital image 
3. 1 digital image 


Join us at Miss Daisy Stamps Create & Share Facebook Group to meet the artists, 
share fun & inspiration, receive freebies and special deals. See you there!


Digital Delights 


Digital Delights by Louby Loo

Prize: $5 gift Certificate 



So come on out and play and join us in this weeks Challenge 
Hope to see you there 
Debs 2